Gigabyte H610M H DDR5 Motherboard

Gigabyte H610M H DDR5 Specification –

1. LGA1700 socket: Support for the 14th, 13th, and 12th Generation Intel^® Core™, Pentium^® Gold and Celeron^® Processors
   * Please refer to “CPU Support List” for more information.
   L3 cache varies with CPU

1. Intel^® H610 Express Chipset

1. 14th and 13th Generation Intel^® Core™ i9/i7 Pocessors:
   – Support for DDR5 5600/5200/4800/4400 MT/s memory modules
   13th Generation Intel^® Core™ i5/i3 and 12th Generation Intel^® Core™, Pentium^® Gold and Celeron^® Processors:
   – Support for DDR5 4800/4400 MT/s memory modules
   2 x DDR5 DIMM sockets supporting up to 96 GB (48 GB single DIMM capacity) of system memory
   Dual channel memory architecture
   Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
   Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
   Support for Extreme Memory Profile (XMP) memory modules
   (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to “Memory Support List” on GIGABYTE’s website for more information.)

1. Realtek^® Audio CODEC
   High Definition Audio
   2/4/5.1/7.1-channel

1. Realtek^® GbE LAN chip (1 Gbps/100 Gbps/10 Mbps)

1. CPU:
   – 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16
   Chipset:
   – 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1

1. 1 x 24-pin ATX main power connector
   1 x 8-pin ATX 12V power connector
   1 x CPU fan header
   2 x system fan headers
   1 x M.2 Socket 3 connector
   4 x SATA 6Gb/s connectors
   1 x RGB LED strip header
   1 x front panel header
   1 x front panel audio header
   1 x speaker header
   1 x USB 3.2 Gen 1 header
   2 x USB 2.0/1.1 headers
   1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/ GC-TPM2.0 SPI V2 module only)
   1 x serial port header
   1 x Clear CMOS jumper
   1 x chassis intrusion header

1. 1 x PS/2 keyboard/mouse port
   1 x D-Sub port
   1 x HDMI port
   2 x USB 3.2 Gen 1 ports
   4 x USB 2.0/1.1 ports
   1 x RJ-45 port
   3 x audio jacks

1. iTE^® I/O Controller Chip

1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Overheating warning
5. Fan fail warning
6. Fan speed control
   * Whether the fan speed control function is supported will depend on the cooler you install.

1. 1 x 128 Mbit flash
   Use of licensed AMI UEFI BIOS
   PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

1. Support for APP Center
   * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.- @BIOS
   – EasyTune
   – Smart Backup
   – System Information Viewer
   Support for Q-Flash

1. Norton^® Internet Security (OEM version)
2. LAN bandwidth management software

1. Support for Windows 11 64-bit
2. Support for Windows 10 64-bit

1. Micro ATX Form Factor; 22.3cm x 19.6cm